Nano coating for helmet glass

A product specially developed for motorcyclists for the outer coating of plastic helmet glasses. The coated surface acquires hydrophobic and oleophobic properties. After impregnating the helmet glass with a nano coating, the surface becomes easy to clean and maintain. Visibility improves when driving in the rain, and the "invisible wiper effect" appears when driving faster than 60 km/h. Conditions required for coating: The product cannot be used at temperatures below 5 degrees Celsius. We recommend wearing gloves during application, as the denatured alcohol contained in the product can dry the skin of the hands. Product effectiveness: 2-3 months, depending on the harshness of the environment and the strength of the effect on the coated surface (e.g. it wears faster when driving at high speed, constantly experiencing physical friction). Preparation: The surface must be thoroughly cleaned, dry, clean and free of grease. Do not touch the surface to be coated during application (unless you wear protective gloves). Covering: 1. Spray the nano cleaner on a cloth and wipe the area to be covered in a circular motion. Make sure the entire surface has been cleaned evenly. 2. Take a bottle of nano coating, spray it on a cloth 4-5 times and rub evenly over the entire cleaned area. 3. The coated surface must not be touched or wet for at least 2 hours. Product yield: 8-10 ml/sq.m Attention: The product should only be used according to the above instructions. If the helmet glass is impregnated with other products, first cover a small area and make sure that the product will not react with the previous one. If you notice that the effect of the nanocoating is weak in certain areas, repeat the coating procedure again. Keep out of reach of children! Do not leave the product in direct sunlight at a temperature below +5°C. Do not leave near open flames, light sources, electrical appliances. If you use the device in a closed room, the room must be well ventilated. The product cannot be transferred to other containers - it may lose its effectiveness.